REXROTH HMS01.1N-W0070-A-07-NNNN

The Rexroth HMS01.1N-W0070-A-07-NNNN is a single-axis inverter module belonging to the IndraDrive Mi series. This compact and modular drive controller is designed for controlling a single AC servo motor. It’s part of Rexroth’s IndraDrive family, known for its high performance, flexibility, and energy efficiency in various automation applications. The “W0070” likely indicates the power rating or current capacity of the inverter. The “-A-07” specifies certain hardware and software options, while “-NNNN” typically represents further customizable or order-specific parameters.

Product Parameters:

Due to the specific “-NNNN” designation, exact parameters can vary. However, typical parameters for the HMS01.1N-W0070-A-07 series include:

• Number of Axes: 1
• Drive Type: Single-Axis Inverter
• Series: IndraDrive Mi
• Nominal Output Current: Likely around 70 A (indicated by “W0070”, but confirm with the specific datasheet)
• Maximum Output Current: Higher than the nominal current for short durations (value to be confirmed)
• Input Voltage: Typically 400-480 VAC
• Output Voltage: Variable, dependent on the connected motor
• Switching Frequency: (To be determined from the specific datasheet)
• Communication Interface: Likely supports various communication protocols such as SERCOS III, Ethernet/IP, PROFINET, etc. (confirm with the specific datasheet)
• Safety Functions: Integrated safety functions such as STO (Safe Torque Off) are likely supported (confirm with the specific datasheet)

Specifications:

As the “-NNNN” suffix denotes a specific configuration, the precise specifications must be obtained from the official Rexroth documentation for the exact HMS01.1N-W0070-A-07-NNNN module. However, general specifications for the HMS01.1N series include

:

• Compact and modular design for space-saving installation.
• High dynamic performance for precise motion control.
• Energy-efficient operation.
• Supports a wide range of Rexroth servo motors.
• Integrated control unit with various control modes (e.g., speed, torque, position).
• Advanced diagnostic and monitoring functions.
• Compliance with relevant industry standards and certifications (e.g., CE, UL).
• Operating Temperature: (To be determined from the specific datasheet)
• Storage Temperature: (To be determined from the specific datasheet)
• Protection Class: (To be determined from the specific datasheet)