GE IC200MDL241
Product Description
The GE Fanuc IC200MDL241 is a discrete input module designed for use in the Versamax I/O and control system2. It provides two groups of 8 discrete inputs, which are positive logic or sourcing – type inputs4. Input devices are connected between the input terminals and common terminals, and the module receives current from AC input devices and returns the current on the common4. It features intelligent processing performed by the CPU or NIU, and provides 16 bits of discrete input data4. The module is powered by the backplane, eliminating the need for an external power module6. It also has 16 individually numbered LEDs and 1 backplane LED. The individual green LEDs indicate the on/off state of each input point, and the green OK LED is on when backplane power is present to the module4.
Product Parameters4
- Input Voltage: 0 – 264V AC (47 – 63Hz), with a nominal voltage of 240V AC.
- On – State Voltage: 155 – 264V AC.
- Off – State Voltage: 0 – 40V AC.
- On – State Current: Minimum 7mA.
- Off – State Current: Maximum 1.5mA.
- On – Response Time: Maximum 1 cycle.
- Off – Response Time: Maximum 2 cycles.
- Input Impedance: Typically 38.5kΩ (reactive) at 60Hz and 46.3kΩ (reactive) at 50Hz.
- Backplane Current Consumption: Maximum 110mA for the 5V output.
- Isolation: User input to logic and frame ground is 250V AC continuous and 1500V AC for 1 minute; group to group is 250V AC continuous and 1500V AC for 1 minute; there is no isolation between points.
Product Specifications6
- Dimensions: 110 x 66.8 x 50mm.
- Weight: Approximately 452g.
- Installation: It is installed on a DIN – rail – supported I/O carrier.
- Warranty: Usually comes with a 12 – month warranty.
- Power Supply: Powered by the backplane.
