GE IS220PAOCH1A
Product Description: The GE IS220PAOCH1A is an Analog Output Module manufactured by General Electric as part of the Mark VIe Series, used in gas turbine control management systems. The Analog Output (PAOC) provides the electrical interface between one or two I/O Ethernet networks and an analog output terminal board. The PAOC contains a BPPx processor board (specifically a BPPB in the PAOCH1A) and an acquisition board pair tailored to the analog output function. It can provide up to eight simplex 0-20 mA current loop outputs and includes an analog-to-digital converter for current feedback from each output. Input to the PAOC is through dual RJ-45 Ethernet connectors and a three-pin power input. Output is through a DC-37 pin connector that connects directly with the associated terminal board connector. Visual diagnostics are provided through indicator LEDs.
Product Parameters (Typical):
- Number of Channels: Eight current output channels, single-ended (one side connected to common)
- Analog Outputs: 0-20 mA, up to 900 Ω burden (18 V compliance)
- Response: Better than 50 rad/sec
- Accuracy: ±0.5% over -30 to 65°C (-22 to 149 °F) temperature and 0 to 900 Ω load impedance; ±0.25% typical at 25°C (77 °F) and 500 Ω load
- D/A Converter Resolution: 16-bit resolution
- Frame Rate: 100 Hz on all eight outputs
- Operating Temperature: -30 to 65°C (-22 to 149°F)
Specifications (Typical):
- Manufacturer: General Electric (GE)
- Part Number: IS220PAOCH1A
- Series: Mark VIe
- Product Type: Analog Output Module
- Size: 8.26 cm high x 4.19 cm wide x 12.1 cm deep (3.25 in x 1.65 in x 4.78 in)
- Weight: Approximately 0.44 kg to 2 kg (sources vary)
- Technology: Surface mount
- Country of Origin: USA
- Compatible Processor Board: BPPB
