GE IC693MDL742

GE Fanuc Series 90-30 Series I/O modules are usually used to convert external analog signals (such as temperature, pressure, flow, etc.) into digital signals that can be recognized by the PLC for PLC processing and control. Analog input modules usually have multiple analog input channels, each of which can collect an analog signal and convert it to a digital value.

Product parameters and specifications (speculated) :
The following parameters are inferred based on the characteristics of the general analog input module, and the specific parameters are subject to the official data:

Type: Analog input module
Compatibility: GE Fanuc Series 90-30 series PLC

Number of input channels: Depending on the model, it may be 4, 8, or 16
Input type: Usually voltage type or current type
Input range: Depending on the specific model and channel, such as 0-10V, 4-20mA, etc
Resolution: Indicates the accuracy of converting an analog signal to a digital signal
Sampling rate: Indicates the frequency at which the module collects the analog signal

Isolation: Usually has isolation between channels to improve anti-interference ability
Power supply: 24V DC
Mounting method: DIN rail mounting
Ambient temperature: 0°C to 60°C
Protection level: IP20
Speculative function:
Analog signal acquisition: converts external analog signals into digital signals
Isolation protection: Each input channel usually has isolation protection to prevent interference
Flexible configuration: The module can be configured through programming software, such as setting the input range, filtering, etc
Diagnosis function: With self-diagnosis function, you can detect module faults
Note:
Model Confirmation: For accurate product information, be sure to check the full model number and documentation for the IC693MDL742.
Application scenario: The module is suitable for industrial automation applications that need to collect analog signals, such as process control, data acquisition, etc.
Configuration and programming: Modules need to be configured and programmed using GE Fanuc programming software such as Proficy Machine Edition.